StarTech SATA to USB Cable with UASP USB3S2SAT3CB for Notebook


The StarTech USB3S2SAT3CB SATA to USB cable is an external drive adapter that gives you quick and easy access to a SATA drive through the USB-A port on a laptop.

New
USB3S2SAT3CB
10000 Items
Hurry up! only 10000 items left in stock!
$23.65
Incl. GST

$21.50

Excl. GST
  • fast delivery
    FAST DELIVERY Australia wide service
  • australian owned
    AUSTRALIAN OWNED 100% Australian
  • SAVE MONEY SAVE THE ENVIRONMENT
    SAVE MONEY SAVE THE ENVIRONMENT

The StarTech USB3S2SAT3CB SATA to USB cable is an external drive adapter that gives you quick and easy access to a SATA drive through the USB-A port on a laptop.

The cable supports USB 3.0 data transfer speeds of 5Gbps. But, you can experience transfer speeds up to 70% faster than conventional USB 3.0, when connected to a computer that also supports UASP. With UASP you can utilize the full potential of a SATA III SSD or HDD. UASP is supported in Windows 8, Mac OS X (10.8 or above), and Linux.

In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.

At the same peak in testing, UASP also shows an 80% reduction in required processor resources. The SATA to USB cable is a portable solution that tucks away nicely in a laptop bag -- no external power is required. The cable lets you easily swap between drives with no need to install the drive inside an enclosure. It’s plug-and-play and doesn’t require drivers.

CONDITION

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

WARRANTY

This item comes with a 24-month manufacturer's warranty.

FEATURES

• Access a SATA SSD or HDD from your laptop with this SATA to USB cable
• Supports USB 3.0 data transfer speeds of 5Gbps and is backward compatible with USB 2.0
• Experience 70% faster read speed and 40% fast write speeds with UASP support
• Save setup time with plug-and-play installation
• Connect to external drives anywhere with this SATA to USB adapter -- no power adapter required

QUICK SPECIFICATIONS

Device Type: Storage controller - external
Bus Type: USB 3.0
Hard Drive Form Factor Compatibility: 2.5"
Interface: SATA 6Gb/s
Data Transfer Rate: 600 MBps
Supported Devices: Hard drive, solid state drive
System Requirements: Linux, Apple macOS X, Microsoft Windows Server 2008 R2, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2003 (32/64-bits), Windows 8 (32/64 bits), Windows 8.1 (32/64 bits)
Dimensions (WxDxH): 4.5 cm x 50 cm x 1 cm
Weight: 189 g

WHAT'S INCLUDED

• USB 3.0 to SATA 2.5" HDD Adapter Cable

Do you have a question about this product? Please call 1800 90 90 99.

USB3S2SAT3CB
New
10000 Items

Specific References

MPN
USB3S2SAT3CB

The StarTech USB3S2SAT3CB SATA to USB cable is an external drive adapter that gives you quick and easy access to a SATA drive through the USB-A port on a laptop.

16 other products in the same category:

Comments (0)