StarTech 1 Port PCI 10/100/1000 32 Bit Gigabit Ethernet Network Adapter Card ST1000BT32

The StarTech ST1000BT32 PCI-based 10/100/1000 Mbps Gigabit Ethernet Network Adapter Card provides a simple connection to a Gigabit Ethernet network and is fully compatible with IEEE 802.3, 802.3u, 802.3ab, and 802.3x standards.

New
ST1000BT32
10000 Items
Hurry up! only 10000 items left in stock!
$33.76
Incl. GST

$30.69

Excl. GST
  • fast delivery
    FAST DELIVERY Australia wide service
  • australian owned
    AUSTRALIAN OWNED 100% Australian
  • SAVE MONEY SAVE THE ENVIRONMENT
    SAVE MONEY SAVE THE ENVIRONMENT

The StarTech ST1000BT32 PCI-based 10/100/1000 Mbps Gigabit Ethernet Network Adapter Card provides a simple connection to a Gigabit Ethernet network and is fully compatible with IEEE 802.3, 802.3u, 802.3ab, and 802.3x standards.

Suitable for any PCI-enabled client, server, or workstation, the Gigabit Ethernet Network Adapter Card supports high performance dual channel networking and maximum data transfer speeds of 1000Mbps in each direction (2000 Mbps total) - up to ten times faster than 10/100 Ethernet.

Compatible with a broad range of operating systems, including Linux, Windows 10, 8/8.1, ME, 2000, XP, XP-64bit, Vista, Vista-64bit, 7, 7-64bit as well as Mac OS 10.4, this high-quality PCI Gigabit NIC includes an optional low profile bracket that makes it easy to install the card in a small form factor/low profile computer case/server.

CONDITION

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

WARRANTY

This item comes with a Limited Lifetime manufacturer's warranty.

FEATURES

• A single 10/100/1000Mbps compatible RJ45 Ethernet port
• Network Link/Activity and 10/100/1000 Mbps LED indicators
• Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, and IEEE 802.3ab, and supports IEEE 802.1Q VLAN tagging
• Full and half duplex support
• Supports Wake-on-LAN function
• Crossover Detection & Auto-Correction (Auto MDI/MDI-X)
• Includes a low profile installation bracket

QUICK SPECIFICATIONS

Product Type: Gigabit Ethernet Card
Interface: RJ45 (Gigabit Ethernet)
Bus Type: PCI / PCI-X (5 / 3.3V)
Card Type: Standard Profile (LP bracket incl.)
Industry Standards:
- IEEE 802.3, IEEE 802.3ab, IEEE 802.11u
- PCI 2.1, 2.2
Chipset ID: Realtek - RTL8110SC
Maximum Data Transfer Rate: 1000 Mbps
Compatible Networks: 10/100/1000 Mbps
Full Duplex Support: Yes
MTBF: 36,000 Hours
Supported Protocols: CSMA/CD
Connector Type(s): PCI / PCI-X (Universal 3.3 & 5V, 32-bit)
External Ports: RJ-45
OS Compatibility:
- Windows NT, ME, 2000, XP, Vista, 7, 8, 8.1, 10
- Windows Server 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
- Netware Server 5.x, Netware ODI for DOS
- Linux 2.6.x to 4.11.x, Unix
- Mac OS X 10.4
Note: IRQ Line & I/O Address allocated by system
LED Indicators: 10/100/1000 Mbits/sec Link/Activity
Material: Steel
Product Length: 4.8 in [12.3 cm]
Product Width: 0.8 in [20.0 mm]
Product Height: 2.5 in [63.0 mm]
Weight of Product: 1.9 oz [53.0 g]

WHAT'S INCLUDED

• Gigabit Ethernet PCI Card
• Low Profile bracket
• Driver CD
• Instruction Manual

Do you have a question about this product? Please call 1800 90 90 99.

ST1000BT32
New
10000 Items

Specific References

MPN
ST1000BT32

The StarTech ST1000BT32 PCI-based 10/100/1000 Mbps Gigabit Ethernet Network Adapter Card provides a simple connection to a Gigabit Ethernet network and is fully compatible with IEEE 802.3, 802.3u, 802.3ab, and 802.3x standards.

16 other products in the same category:

Comments (0)