P2 Mobile Gigabit POE+ Injector GE.PW-AT00-00 for Z100, Z500 and X20
The P2 Mobile GE.PW-AT00-00 is a Gigabit POE+ Injector that is compatible with Z100, Z500 and X20.
The P2 Mobile GE.PW-AT00-00 is a Gigabit POE+ Injector that is compatible with Z100, Z500 and X20.
CONDITION
Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.
WARRANTY
This item comes with a 12-months manufacturer's warranty.
FEATURES
• Optional purchase
• For Z100/Z500/X20
• 802.3at/af Compliant
• Output: 54V, 0.65A, • 35W (Max.)
• 1000 Mbps Ethernet,
• Full Duplex
• C8 Appliance Inlet
• Excluding power cord with C7 Connector and Ethernet port)
QUICK SPECIFICATIONS
• Rated Voltage: 100 to 240 VAC
• Variation Voltage: 90 to 270 VAC
• Rated Frequency: 50 to 60 Hz
• Variation Frequency: 47 to 63 Hz
• Input Current: 1A rms(Max., 100 VAC input full load)
• Output Voltage: +54 VDC
• Output Current: 0.65 A (Max., continuous load)
• Output Power: 35 W (Max.)
• Line Regulation: ±5%
• Ripple and Noise: 200 mV p-p (Max.)
• Efficiency: 80% (Full load, Typical, 230 VAC input)
• Surge:
4 KV (PoE-AC; PoE-Data; AC-Data)
4 KV (AC line to line)
500 V (PoE line to line (48V-RTN)
• Switching Frequency: 65 KHz (Typ.)
• Compatibility: 802.3at/af Compliant
• Data: 1000 Mbps Ethernet, Full Duplex
• Short Circuit Protection: Yes (When current is 0.7 to 0.79 A)
• Over Current Protection: Yes (When current is 0.7 to 0.79 A)
• Overage Voltage Protection: Yes, With auto recovery
• Operating Temperature: -10 °C to +50 °C; 25°C (Typ.)
• Storage Temperature: -40 °C to +70 °C; 25°C (Typ.)
• Relative Humidity: 5 to 95%
• Cooling: Convention cooling
• Altitude: 5,000 m above sea level
• Dielectric Strength: 3,000 VAC/ 10 mA/ 1 minute
• Insulation Resistance: 100 MΩ (Min., @500 VDC)
• Leakage Current: 0.25 mA (Max., @240 VAC)
• Safety Standards: IEC60950, EN60950, UL60950
• EMC: FCC Class B, EN55022 Class B
• RoHS: EU2011/65/EU, China SJ/T11363-2006
• Dimensions: 172 x 62 x 31 mm
• Weight: 250 g
• Input Power Receptacle: IEC 320/C8
• Data: Unshielded RJ45, EIA 568A+568B
• RJ-45 Pin Connections:
Input: Pin 1 to 8: Data
Output: Pin 1, 2, 4, 5: +VDC & Data
Pin 3, 6, 7, 8: -VDC & Data
• LEDs:
PORT (Green = PoE OK)
AC (Green = Power OK)
• MTBF: 100,000 hours (@25°C ambient)
WHAT'S INCLUDED
• P2 Mobile GE.PW-AT00-00
Do you have a question about this product? Please call 1800 90 90 99.
Specific References
- MPN
- GE.PW-AT00-00
The P2 Mobile GE.PW-AT00-00 is a Gigabit POE+ Injector that is compatible with Z100, Z500 and X20.