The Kingston KVR16LS11/8 is a 1G x 64-bit (8GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 2Rx8, low voltage, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This 204-pin SODIMM uses gold contact fingers.

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

This item comes with a Limited Lifetime manufacturer's warranty.

• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply
• VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB: Height 1.18” (30mm), double sided component

• Product Type: RAM Module
• CAS Latency CL11
• Device Supported Notebook
• Error Checking Non-ECC
• Number of Modules 1 x 8 GB
• Plating Gold Plated
• Signal Processing Unbuffered
• Memory Speed 1600 MHz
• Memory Size 8 GB
• Memory Technology DDR3 SDRAM
• Memory Standard DDR3-1600/PC3-12800
• Memory Voltage 1.35 V
• Number of Pins 204-pin
• Form Factor SoDIMM

• 1 x Kingston ValueRAM 8GB 1600MHz DDR3L Non-ECC CL11 SODIMM KVR16LS11/8
• User Guide

Do you have a question about this product? Please call 1800 90 90 99.