The Kingston Fury Renegade Black 16GB DDR4-3200 CL16 288-Pin DIMM Kit KF432C16RBK2/16 is consists of two 1G x 64-bit (8GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. the total kit capacity is 16GB. Each module has been tested to run at DDR4-3200 at a low latency timing of 16-18-18 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

You may also check all the Computer Memory , we have at The Telecomshop.

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

This item comes with a Limited Lifetime Manufacturer's warranty.

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.66” (42.2mm), w/heatsink

• Product Type: RAM Module
• Number of Pins: 288-pin
• Thickness: 8.3 mm
• Form Factor: DIMM
• Length: 133.4 mm
• Width: 42.2 mm
• CAS Latency: CL16
• Device Supported: Motherboard
• Error Checking: Non-ECC
• Number of Modules: 2 x 8GB
• Signal Processing: Unbuffered
• Memory Speed: 3200 MHz
• Memory Size: 16 GB
• Memory Technology: DDR4 SDRAM
• Memory Standard: DDR4-3200/PC4-25600
• Memory Voltage: 1.35 V
• Memory Rank: Single-rank

• 2x Kingston Fury Renegade Black 8GB DDR4-3200 CL16 SDRAM
• User Guide

Do you have a question about this product? Please call 1800 90 90 99.