The Kingston KVR32N22S8/16 is a 2G x 64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

This item comes with limited lifetime manufacturer's warranty.

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free

• Product Type: Memory Module
• CAS Latency: CL22
• Device Supported: Server/Motherboard
• Error Checking: Non-ECC
• Signal Processing: Unbuffered
• Memory Speed: 3200 MHz
• Memory Size: 16 GB
• Memory Technology: DDR4 SDRAM
• Memory Standard: DDR4-3200/PC4-25600
• Memory Voltage: 1.20 V

• Kingston 16GB Memory KVR32N22S8/16
• User Guide

Do you have a question about this product? Please call 1800 90 90 99.