The HPE 5130 48-port PoE+ 1-slot HI Managed Switch JH326A is part of the HPE FlexNetwork 5130 HI Series switches deliver scalability and resiliency at the access layer of medium and large enterprise campus networks. The HPE JH326A switch has 48 x 10/100/1000 PoE+ ports and 4x GbE SFP slots and 2 x 10GbE SFP+ slots. At the back of the unit, is an empty module slot supporting two choices of expansion module, either 2 port 1/10GBASE T module or 2 port SFP+ ports.

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

This item comes with Limited Lifetime warranty.

• Flow control
• DHCP support
• ARP support
• VLAN support
• auto-uplink (auto MDI/MDI-X)
• Syslog support
• Weighted Round Robin (WRR) queuing
• IPv6 support
• sFlow
• Spanning Tree Protocol (STP) support
• Rapid Spanning Tree Protocol (RSTP) support
• Virtual Route Redundancy Protocol (VRRP) support
• Multiple Spanning Tree Protocol (MSTP) support
• Port Aggregation Protocol (PAgP) support
• Access Control List (ACL) support
• Quality of Service (QoS)
• Committed Access Rate (CAR)
• DHCP server
• Device Link Detection Protocol (DLDP) support
• Equal-Cost Multipath (ECMP)
• STP Root Guard
• IPv4 support
• LLDP support
• Smart Link Pass-Through
• dynamic ARP protection
• DHCP protection
• port isolation
• non blocking ports
• Strict Priority (SP)
• Generic Attribute Registration Protocol (GARP)
• Intelligent Resilient Framework Technology (IRF)
• OpenFlow support
• IP source guard

• Device Type: Switch - 48 ports - Managed - stackable
• Enclosure Type: Rack-mountable 1U
• Subtype: Gigabit Ethernet
• Ports: 48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+
• Power Over Ethernet (PoE): PoE+
• PoE Budget: 1440 W
• Performance: Throughput: up to 190.5 Mpps ? Routing/switching capacity: 256 Gbps
• Capacity: Simultaneous VLANs: 4094 ? IPv4 routing table entries: 32768 ? IPv6 routing table entries: 16384
• Jumbo Frame Support: 9KB
• Routing Protocol: RIP-1, RIP-2, IGMPv2, IGMP, PIM-SM, IGMPv3, MSDP, MLD
• Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS, TFTP, SSH-2, CLI, SCP
• Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3az
• Power: AC 120/230 V (50/60 Hz)
• Power Redundancy: Optional
• Dimensions (WxDxH): 43.99 cm x 46 cm x 4.37 cm
• Weight: 12.5 kg

• 1 x HPE 5130 48-port PoE+ with 4 x 10 Gigabit SFP+ ports 1-slot HI Managed Switch JH326A
• User Guide

Do you have a question about this product? Please call 1800 90 90 99.