The Eaton 380 V AC Surge Suppressor-Protector ESF633-TN-E is the perfect solution for protecting your electronic devices from power surges. With its compact design, this surge protector can be easily installed in various locations such as Class II / Cat B, C, and D equipment, point of entry, distribution boards, and sub-boards. One of the key features of this surge protector is its 2-mode protection, allowing you to choose between L-N or L-E & N-E protection. This flexibility ensures that your devices are protected from any potential damage caused by voltage fluctuations. Additionally, the high kA rating per phase of 100kA and Imax ensures that this surge protector can handle even the most severe power surges.

What sets the Eaton 380 V AC Surge Suppressor-Protector ESF633-TN-E apart from others in the market is its exceptionally low let through voltage. This means that when a power surge occurs, only a minimal amount of voltage is allowed to pass through, keeping your devices safe and preventing any damage. With a sleek black design, the Eaton 380 V AC Surge Suppressor-Protector ESF633-TN-E will seamlessly blend into any setup. Whether you have a home office or a commercial space, this surge protector will not only protect your devices, but also enhance the overall aesthetics. Considering its advanced features, high-quality construction, and long warranty period, this surge protector is a smart investment for anyone looking to protect their electronic devices.

Shop the Eaton 380 V AC Surge Suppressor-Protector ESF633-TN-E today and discover the peace of mind that comes with superior surge protection. At the Telecom Shop, we offer a wide range of telephone systems and devices at competitive prices. Place your order now and safeguard your valuable electronics against power surges.

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

This item comes with a 60-month manufacturer's warranty.

•   Compact solution for Class II / Cat B,C & D, Point of Entry, distribution board and sub board surge protection
•   2 mode protection L-N or L-E & N-E
•   High kA rating per phase 100kA, Imax
•   Exceptionally low let through voltage <600V @ 3kA / 8/20us, <800V @ 50kA / 8/20us, Inom
•   50A to 80A single and three phase models
•   Fully enclosed and gear tray versions to suit switch boards
•   Can be configured for 3:1 phase bypass loads
•   Available in TN & TT systems versions
•   Eliminates RCD/ELCB tripping by being installed at the service bus UPSTREAM of RCD/ELCB’s. ( In accordance with latest wiring rules recommendations.)
•   Cost effective solution where multiple 20A series filters cause cost over run and increased cabinet foot print.

•   Input voltage : (Uc) 380 – 440VAC
•   Max Continuous Voltage (Mcov): 320VAC L-N
•   Service type: TN-S, TN C-S SYSTEMS
•   Nominal discharge current: Class II In L-N 50kA, N-E 50 kA
•   Current rating – continuous: 50, 63 or 80A
•   Recommended maximum over current protection: HRC gL fuse rated according to the unit’s rating
•   Residual current : <10 mA
•   Short circuit withstand (1 sec) : 29kA
•   Primary protection modes : Line-Neutral, Neutral-Earth
•   In 8/20us (Line-Neutral or Line-Earth) : 50kA
•   In 8/20us (Neutral-Earth) : 50kA
•   Ismax 8/20us ( Line – Neutral ) : 100kA
•   Nominal surge lifetime : 15 hits @ 50kA (8/20uS, each mode)
•   Filter attenuation : 48dB nominal above 1MHz
•   Initial clamp voltage (Line-Neutral) : 510V
•   Initial clamp voltage (Neutral-Earth) : 255V
•   Residual voltage (Vpl) Line-Neutral: <600V (3kA, 8/20uS)
•   Residual voltage (Vpl) Neutral-Earth: <1000V (3kA, 8/20uS)
•   Residual voltage (Vpl) Line-Neutral: <800V (50kA, 8/20uS)
•   Residual voltage (Vpl) Neutral-Earth: <1100V (50kA, 8/20uS)
•   Internal protection (fusing) : All surge diverter elements are thermally fused
•   External disconnector requirements Line side : 1 or 3 pole, HRC gL fuse, 500v, 50KAIC
•   Load side : 10kAIC or better MCB
•   Thermal dissipation : Max 200W @ full load, 3 phase, 80A model
•   Standards. Designed in accordance with : IEC61643-1:2005, IEC610006-1,2,3,4 ANSI/IEEE C62.41, AS/NZS1768, AS/NZS3000:2007, AS3100 Environment -10 to 65°C, 10 to 90%RH (non-condensing)
•   Dimensions : Including hinges (H x W x D, mm) 520 x 400 x 220
•   Weight (kg) : 10

• Eaton 380 V AC Surge Suppressor-Protector ESF633-TN-E
• User Guide

Do you have a question about this product? Please call 1800 90 90 99.