Cisco Spare SM-X 16-Port Plug-in Module SM-X-16G4M2X= for C1-CISCO4331/K9, ISR4451-PM20

  The Cisco SM-X Plug-in Module SM-X-16G4M2X= features an SFP+ port that may be independently configured with a 1G SFP or a 10G SFP+ interface. The Cisco SM-X Layer2 EtherSwitch Service Module takes advantage of the increased capabilities on the Cisco UADP module to provide scale, security and ease of operation.

New
CSPMSMX16G4M2XBN
10000 Items
Hurry up! only 10000 items left in stock!
$6,636.54
Incl. GST

$6,033.22

Excl. GST
  • fast delivery
    FAST DELIVERY Australia wide service
  • australian owned
    AUSTRALIAN OWNED 100% Australian
  • SAVE MONEY SAVE THE ENVIRONMENT
    SAVE MONEY SAVE THE ENVIRONMENT

The Cisco SM-X Plug-in Module SM-X-16G4M2X= provides for an enterprise-class line of features on the Cisco ISR 4000 series routers, greatly expanding the capabilities of the router by integrating industry-leading Layer 2 switching with feature sets that are built on the lines of those found in the Cisco Catalyst 9200 Series switches. The Cisco SM-X Layer2 EtherSwitch Service Modules support the same UADP 1.0 ASIC as the Catalyst 9200 it allows the module to provide a ubiquitous configuration at headquarters and at the branch office to create a consistent experience throughout your network.

CONDITION

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

WARRANTY

This item comes with a 12-month manufacturer's warranty.

FEATURES

• Diverse downlink capabilities on a single module supporting data, PoE+ UPOE or 2.5G mGig
• UADP 2.0 Mini compliant ASIC offers customers optimized scale with better cost structure
• Enhanced security with AES-128 MACsec encryption[2], and trustworthy systems
• Support for SDWAN configuration and setup through the Cisco vManage
• Device Authentication through support for 802.1x capabilities
• Support for local line rate local line-rate switching as also support for direct service module-to-service module communication through the ISR 4K Multigigabit Fabric (MGF), separating LAN traffic from WAN resources.

QUICK SPECIFICATIONS

Product Description: Cisco SM-X EtherSwitch Service Module - switch - 16 ports - plug-in module
Device Type: Switch - 16 ports
Enclosure Type: Plug-in module
Subtype: Gigabit Ethernet
Ports: 16 x 10/100/1000 + 4 x 100/1000/2.5G + 2 x combo SFP/SFP+
Power Over Ethernet (PoE): High PoE / ePoE
Features: DHCP support, NAT support, auto-negotiation, Spanning Tree Protocol (STP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, Uni-Directional Link Detection (UDLD), LLDP support, Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF), Class of Service (CoS), DiffServ Code Point (DSCP) support, Authentication, Authorization and Accounting (AAA), BPDU Filter, Switched Port Analyzer (SPAN), Ethernet Virtual Connections (EVC), IPv4 multicasting, Extensible Authentication Protocol over LAN (EAPOL), Cisco Discovery Protocol (CDP)
Compliant Standards: IEEE 802.3af, IEEE 802.1x, IEEE 802.3at

WHAT'S INCLUDED

• Cisco Spare SM-X 16-Port Plug-in Module SM-X-16G4M2X=
• User Guide

Do you have a question about this product? Please call 1800 90 90 99.

CSPMSMX16G4M2XBN
New
10000 Items

Specific References

MPN
SM-X-16G4M2X=

  The Cisco SM-X Plug-in Module SM-X-16G4M2X= features an SFP+ port that may be independently configured with a 1G SFP or a 10G SFP+ interface. The Cisco SM-X Layer2 EtherSwitch Service Module takes advantage of the increased capabilities on the Cisco UADP module to provide scale, security and ease of operation.

Comments (0)