Cisco CGR2010 with 2GE 2U Rack Mountable Router CGR-2010/K9

The Cisco CGR2010 with 2GE 2U Rack Mountable Router CGR-2010/K9 provides 2 SFP slots supporting 100mbps or 1000mbps rugged fiber SFPs. Both Ethernet WAN ports on the CGR 2010 are dual purpose ports and can support either two Small Form-Factor Pluggable fiber (SFP)-ports, two 10/100/1000mbps copper ports, or one of each.

New
CGR-2010/K9
10000 Items
Hurry up! only 10000 items left in stock!
$8,305.91
Incl. GST

$7,550.83

Excl. GST
  • fast delivery
    FAST DELIVERY Australia wide service
  • australian owned
    AUSTRALIAN OWNED 100% Australian
  • SAVE MONEY SAVE THE ENVIRONMENT
    SAVE MONEY SAVE THE ENVIRONMENT

The Cisco CGR2010 with 2GE 2U Rack Mountable Router CGR-2010/K9 provides 2 SFP slots supporting 100mbps or 1000mbps rugged fiber SFPs. Both Ethernet WAN ports on the CGR 2010 are dual purpose ports and can support either two Small Form-Factor Pluggable fiber (SFP)-ports, two 10/100/1000mbps copper ports, or one of each. These SFPs are not available as part of the system order and should be ordered as spares if needed.

You may also check all the Cisco Networking Router models we have at The Telecomshop.

CONDITION

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

WARRANTY

This item comes with Cisco Five-Year Limited Hardware Warranty

FEATURES

• Hardware encryption
• VPN support
• MPLS support
• VLAN support
• Syslog support
• IPv6 support
• Class-Based Weighted Fair Queuing (CBWFQ)
• Weighted Random Early Detection (WRED)
• wall mountable
• Quality of Service (QoS)

SPECIFICATIONS

Product Description: Cisco 2010 - router - rack-mountable
Device Type: Router
Enclosure Type: Rack-mountable - modular - 2U
Data Link Protocol: Ethernet, Fast Ethernet, Gigabit Ethernet
Network / Transport Protocol: L2TP, IPSec, PPPoE, PPPoA
Routing Protocol: OSPF, IS-IS, BGP, EIGRP, DVMRP, PIM-SM, IGMPv3, GRE, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based routing (PBR)
Remote Management Protocol: SNMP, RMON
Compliant Standards: IEEE 802.1Q, IEEE 802.3ah, IEEE 802.1ag
RAM: 1 GB
Flash Memory: 256 MB
Interfaces: 2 x 10Base-T/100Base-TX/1000Base-T - RJ-45 | Serial: 1 x console - RJ-45 | Management: 1 x console - mini-USB Type B | Serial: 1 x auxiliary - RJ-45 | USB 2.0: 2 x 4 pin USB Type A | 2 x SFP (mini-GBIC)
Expansion Slots: 4 (total) / 4 (free) x GRWIC | 2 (total) / 1 (free) x CompactFlash
Dimensions (WxDxH): 43.8 cm x 38.1 cm x 8.9 cm

WHAT'S INCLUDED

• Cisco CGR2010 with 2GE 2U Rack Mountable Router CGR-2010/K9
• Rack Mounting Kit

Do you have a question about this product? Please call 1800 90 90 99.

CGR-2010/K9
New
10000 Items

Specific References

MPN
CGR-2010/K9

The Cisco CGR2010 with 2GE 2U Rack Mountable Router CGR-2010/K9 provides 2 SFP slots supporting 100mbps or 1000mbps rugged fiber SFPs. Both Ethernet WAN ports on the CGR 2010 are dual purpose ports and can support either two Small Form-Factor Pluggable fiber (SFP)-ports, two 10/100/1000mbps copper ports, or one of each.

16 other products in the same category:

Comments (0)