The Cisco Catalyst 9300L 24-port 8mGig Network Advantage 4x10G Uplink Switch C9300L-24UXG-4X-A is designed for Cisco StackWise technology, providing flexible deployment with support for nonstop forwarding with Stateful Switchover (NSF/SSO), for the most resilient architecture in a stackable (sub-50-ms) solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The Cisco Catalyst 9300L will make your business networking easy, secured, reliable, versatile, and powerful.

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

This item comes with Limited-Lifetime manufacturer's warranty.

• Network Advantage
• L3
• managed
• 24 x 10/100/1000 (UPOE) + 4 x 10 Gigabit SFP+ (uplink)
• rack-mountable
• UPOE (880 W)
• Access Control List (ACL) support
• Quality of Service (QoS)
• Rapid Per-VLAN Spanning Tree Plus (PVRST+)
• Shaped Round Robin (SRR)
• PXE support
• Energy Efficient Ethernet
• Class of Service (CoS)
• Flexible NetFlow (FNF)
• 802.1x authentication
• 16MB packet buffer
• DiffServ Code Point (DSCP) support
• MACsec support
• Control plane protection (CoPP)
• Blue Beacon LED
• Zero-touch provisioning (ZTP)
• secure boot
• Protocol Independent Multicast (PIM)
• First Hop Security (FHS)
• PVLAN support
• Committed Information Rate (CIR)
• Cisco Trust Anchor module
• Cisco Unified Access Data Plane (UADP) 2.0
• Cisco StackWise-320 technology

• Enclosure Type: Rack-mountable
• Subtype: Gigabit Ethernet
• Ports: 24 x 10/100/1000 (UPOE) + 4 x 10 Gigabit SFP+ (uplink)
• Power Over Ethernet (PoE): UPOE
• PoE Budget: 880 W
• Performance Switching capacity: 272 Gbps ¦ Switching capacity with stacking: 592 Gbps ¦ Forwarding rate: 202.38 Mpps ¦ Forwarding rate with stacking: 440.47 Mpps
• Capacity: IPv4 routes: 32000 ¦ IPv6 routes: 16000 ¦ Multicast scale: 8000 ¦ QoS scale entries: 5120 ¦ ACL scale entries: 5120 ¦ VLANs supported: 4094 ¦ Switched virtual interfaces (SVIs): 1000
• MAC Address Table Size: 32000 entries
• Jumbo Frame Support: 9198 bytes
• Routing Protocol: OSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MSTP
• Remote Management Protocol: SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF, gRPC, IPv4, IPv6, YANG
• Encryption Algorithm: 128-bit AES, 256-bit AES
• Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 1588v2, IEEE 802.1BA, IEEE 802.3bt, Wi-Fi CERTIFIED 6
• RAM: 8 GB
• Flash Memory: 16 GB
• Status Indicators: Status
• Interfaces: 16 x 1000Base-T RJ-45 60 W ¦ 4 x 10GBase-X SFP+ uplink ¦ 1 x network stack device ¦ 1 x management (LAN) RJ-45 ¦ 1 x console ¦ 1 x USB 2.0 ¦ 8 x 1/2.5/5/10GBase-T RJ-45

• 1 x Cisco Catalyst 9300L 24-port 8mGig Network Advantage 4x10G Uplink Switch C9300L-24UXG-4X-A
• User Guide

Do you have a question about this product? Please call 1800 90 90 99.