The Aten CS1708A-AT-U is a control unit that allows access to multiple computers from a single PS/2 or USB console (keyboard, mouse, and monitor). It can control up to 8 computers. As many as 31 additional switches can be daisy-chained to each other so that up to 256 computers can all be controlled from a single keyboard-monitor-mouse console. Additionally, a front-panel USB port is available for each computer to access any peripherals connected to it on a one-at-a-time basis.

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

This item comes with a 12 months manufacturer's warranty.

• One USB-PS/2 console controls up to 8 computers
• Daisy-chain up to 31 additional units - control up to 256 computers from a single console
• Front accessible USB port allows each computer to access USB peripherals *
• Dual Interface - supports computers and consoles with PS/2 or USB keyboards and mice
• Multiplatform support - Windows, Linux, Mac, and Sun
• Video DynaSync™ - stores the console monitor's EDID (Extended Display Identification Data) to optimize display resolution
• Supports USB keyboards for PC, Mac, and Sun
• Auto PS/2 and USB interface detection
• USB / PS/2 keyboard and mouse emulation - computers boot even when the console focus is elsewhere
• Superior video quality - up to 2048 x 1536; DDC2B
• No software required - convenient computer selection via front panel pushbuttons, hotkeys, and multilingual on-screen display (OSD) menus
• Auto-senses station's position on daisy-chained installations; no need for manual dip switch setting; front panel led indicates station's position
• Port names automatically reconfigured when station sequence is changed
• Two level password security; only authorized users view and control computers; up to four users and an administrator with separate profiles for each
• Auto Scan feature for monitoring user-selected computers
• Broadcast Mode - operation simultaneously performed on all selected computers... etc
• Hot pluggable - add or remove computers without having to power down the switch
• Buzzer on/off via hotkey and OSD
• Firmware upgrades to all the chained KVM switch at the same time via the daisy-chain cable
• Rack mountable in 19" system rack (1U)

* The USB peripheral function only works with USB cable set connections. It will not work with PS/2 cable set connections.

• Computer Connections
Direct: 8
Maximum: 256 (via Daisy-chain)

• Port Selection: OSD, Hotkey, Pushbutton

• Connectors
Console Ports: 1 x SPHD-18 Male (Yellow)
KVM Ports: 8 x SPHD-15/17 Female (Yellow)
Daisy Chain Ports: 1 x DB-25 Female (Black), 1 x DB-25 Male (Black)
Firmware Upgrade: 1 x RJ-11 Female (Black)
USB Port: 1 x USB Type A Female
Power: 1 x DC Jack Female (Black)

• LEDs
Online: 8 (Orange)
Selected: 8 (Green)
Station ID: 1 x 2-digit, 7-segment (Orange)
Power: 1 (Dark Green)

• Switches
Port Selection: 8 x Pushbutton
Firmware Upgrade Recovery: 1 x Slide

• Emulation
Keyboard / Mouse: PS/2, USB

• Video: 2048 x 1536; DDC2B

• Scan Interval: 1 – 255 Seconds (Default: 5 secs)

• Power Consumption: DC5.3V:3.8W:33BTU

• Environmental
Operating Temperature: 0-50˚C
Storage Temperature: -20-60˚C
Humidity: 0-80% RH, Non-condensing

• Physical Properties
Housing: Metal
Weight: 2.66 kg ( 5.86 lb )
Dimensions (L x W x H): 43.72 x 15.99 x 4.40 cm, (17.21 x 6.3 x 1.73 in.)

Note
For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

• Aten 8-Port PS/2-USB VGA KVM Switch with Daisy-Chain Port and USB Peripheral Support CS1708A-AT-U
• 1x Custom KVM Cable (VGA, USB; 1.8m/6ft)
• 1x Custom KVM Cable (VGA, PS/2; 1.8m/6ft)
• 1x Custom Console Cable (VGA, USB, PS/2; 27 cm/0.88 ft)
• 1x Firmware Upgrade Cable
• 1x Foot Pad Set(4 PCS)
• 1x Power Adapter
• 1x User Instructions

Do you have a question about this product? Please call 1800 90 90 99.