The Aten CS1942DP-AT-U helps organize your desktop. Especially when managing a multimedia workstation at a large organization, also provides you with instant access to two or four computers, all through a single USB keyboard, USB mouse, and two DisplayPort monitors.

Advanced video support provides a better-defined DisplayPort connection with video resolutions up to 4K (4096 x 2160 / 3840 x 2160 @ 60 Hz). Incorporating dual-display capability, you are allowed to enjoy a wider screen and easily switch between two or four DisplayPort systems. In addition, featuring a built-in USB 3.1 Gen 1 hub, it delivers unprecedented data transfer rates up to 5 Gbps, allowing you to maximize multimedia operations.

*Note:
As is common with DisplayPort KVM switches, switching between KVM ports in an Extended Desktop setup may cause windows open on the extended desktop to be resized/repositioned back to a default configuration on the main display. This is due to the nature of the DisplayPort protocol and may require a manual readjustment.

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

This item comes with a 24 months manufacturer's warranty.

• One USB keyboard and mouse controls two DisplayPort computers and share two USB peripherals
• Supports Quad Display by connecting two Dual Display KVM switches
• Supports superior video quality – Up to 4K (4096 x 2160 / 3840 x 2160 @ 60 Hz)
• Computer Selection via front panel, hotkeys, mouse, and RS-232 commands
• 2- Port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates
• Supports DisplayPort Dual-Mode technology (DP++)1
• Supports MST (Multi-Stream Transport)2
• Supports Console keyboard emulation / bypass feature
• Supports Console mouse emulation / bypass feature
• Independent switching of KVM, USB, and Audio
• Multilingual keyboard mapping – supports English, French, Japanese, and German keyboards
• DisplayPort 1.2 compliant; HDCP compliant3
• Supports HD audio4
• Power on detection
• Firmware upgradable

Note:
1.DisplayPort Dual-Mode technology (DP++) does not require an active adapter for most single display setups. Active DisplayPort adapters are recommended if you are unsure of the video source's DP++ compatibility.
2. MST (Multi-Stream Transport) requires either monitors that are capable of DisplayPort 1.2 daisy-chaining or the use of a powered DisplayPort MST Hub. A DisplayPort v1.1a display can be the last display in a DisplayPort v1.2 chain. The PC source must be DisplayPort 1.2 compliant
3. For a DisplayPort 1.4 compliant display device, make sure to configure the device set to be compatible with DisplayPort 1.2 to avoid compatibility issues.
4.HD audio through DisplayPort cannot be switched independently

• Computer Connections: 2

• Port Selection: Hotkey, Pushbutton, Mouse, RS-232 Commands

• Connectors
Console Ports: 2 x USB Type A Female, 2 x DisplayPort Female (Black), 2 x 3.5mm Audio Jack Female (Green; 1 x front, 1 x rear), 2 x 3.5mm Audio Jack Female (Pink; 1 x front, 1 x rear)
KVM (Computer) Ports: 2 x USB3.1 Gen1 Type B Female (Blue), 4 x DisplayPort Female (Black), 2 x 3.5mm Audio Jack Female (Green), 2 x 3.5mm Audio Jack Female (Pink)
Daisy Chain Ports: 1 x RJ-45 Female
Power: 1 x DC Jack
USB Hub: 2 x USB3.1 Gen1 Type A Female (Blue; 1 x front; 1 x rear)

• LEDs
KVM: 3 (Orange)
Audio: 3 (Green)
USB Link: 3 (Green)

• Switches
Selected: 3 x Pushbutton
Station Selection: 1 x Slide Switch

• Emulation
Keyboard / Mouse: USB

• Video: 4096 x 2160 @ 60Hz

• Scan Interval: 1-99 seconds (default: 5 seconds)

• Power Consumption: DC12V:3.48W:73BTU

• Environmental
Operating Temperature: 0–50°C
Storage Temperature: -20–60°C
Humidity: 0-80% RH, Non-condensing

• Physical Properties
Housing: Metal
Weight: 1.54 kg ( 3.39 lb )
Dimensions (L x W x H): 33.50 x 15.66 x 4.40 cm, (13.19 x 6.17 x 1.73 in.)

Note
For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

• Aten 2-Port USB 3.0 4K DisplayPort Dual Display KVMP Switch CS1942DP-AT-U
• 4x DisplayPort 1.2 Cables
• 2x USB 3.0 Cables
• 4x Audio Cables
• 1x Power Adapter
• 1x User Instructions

Do you have a question about this product? Please call 1800 90 90 99.